超聲波清洗機在使用中的注意事項介紹
瀏覽： 發布日期：2019-09-27
超聲波清洗機在使用中的注意事項介紹
(1) Ultrasonic cleaning machine power supply and heater power supply must have good grounding device.
超聲波清洗機因?yàn)槠洫?dú)有的特點而被廣泛應用于各個領域之中，并受到大家的一致稱贊。但是大家在使用超聲波清洗機的時候需要注意一些什么呢？本文就其使用中的一些注意事項，做出簡單說明。
(2), the ultrasonic cleaning machine is strictly prohibited to start without cleaning liquid, that is, the cleaning cylinder does not add a certain amount of cleaning liquid, and the ultrasonic switch must not be opened.
⑴、超聲波清洗機電源及加熱器電源必須有良好接地裝置。
(3) The cleaning equipment with heating equipment is strictly prohibited to open the heating switch when there is no liquid.
⑵、超聲波清洗機嚴禁無清洗液開機，即清洗缸沒有加一定數量的清洗液，不得開超聲波開關。
(4) It is forbidden to hit the bottom of the cleaning cylinder with heavy objects (iron pieces) to avoid damage to the energy converter chip.
⑶、有加熱設備的清洗設備嚴禁無液時打開加熱開關。
(5), the ultrasonic generator power supply should be used alone 220V/50Hz power supply and equipped with more than 2000W regulator.
⑷、禁止用重物（鐵件）撞擊清洗缸缸底，以免能量轉換器晶片受損。
(6) The bottom of the cleaning cylinder should be flushed regularly, and there should be no excessive impurities or dirt.
⑸、超聲波發生器電源應單獨使用一路220V/50Hz電源并配裝2000W以上穩壓器。
(7) When the ultrasonic cleaning machine changes the new liquid, it can be washed after the ultrasonic is started. ⑹、清洗缸缸底要定期沖洗，不得有過多的雜物或污垢。
⑺、超聲波清洗機每次換新液時，待超聲波起動后，方可洗件。
