超聲波清洗機清洗液的應用作用
瀏覽： 發布日期：2019-09-12
超聲波清洗機清洗液在諸多方面的應用作用_濟南潔升超聲波清洗機
Ultrasonic cleaning machines are usually pre-cleaned by dipping, spraying, etc., to clean a large amount of dirt. After removing most of the dirt, the remaining dirt is ultrasonically cleaned, and the effect is good. If you clean small items and complicated shapes (parts), if you use a cleaning net or rotate the cleaning object, you can use ultrasonic radiation while vibrating, and you can get even cleaning.
超聲波清洗機水清洗液最適宜的清洗溫度為40-60℃，尤其在天冷時若清洗液溫度低空化效應差，清洗效果也差。因此有部分超聲波清洗機在清洗缸外邊繞上加熱電熱絲進行溫度控制，當溫度升高后空化易發生，所以清洗效果較好。當溫度繼續升高以后，空泡內氣體壓力增加，引起沖擊聲壓下降，反應出這兩因素的相乘作用。
Ultrasonic cleaning machine has good cleaning effect, high cleanliness and consistent cleanliness of all workpieces. The cleaning speed is fast, the production efficiency is improved, and the cleaning liquid is not required to be touched by human hands, which is safe and reliable. Deep holes, slits and hidden parts of the workpiece can also be cleaned. No damage to the surface of the workpiece, saving solvent, heat, work site and labor.
超聲波清洗機清洗大量污垢的零件一般要采用浸、噴射等方法進行預清洗。在清除了大部分污垢之后，再用超聲清洗余下的污垢，則效果好。如果清洗小物品及形狀復雜的物品（零件）時，如果采用清洗網或者使清洗物旋轉，邊振動邊用超聲輻射，能得到均勻清洗。
Ultrasonic cleaning machine method is more than the conventional cleaning method, especially the surface of the workpiece is more complicated, such as some surface irregularities, mechanical parts with blind holes, some products with special requirements for cleanliness such as: watches And precision mechanical parts, electronic components, circuit board components, etc., using ultrasonic cleaning can achieve very good results.
超聲波清洗機清洗效果好，清潔度高且全部工件清潔度一致。清洗速度快，提高生產效率，不須人手接觸清洗液，安全可靠。對深孔、細縫和工件隱蔽處亦可清洗干凈。對工件表面無損傷，節省溶劑、熱能、工作場地和人工。
The mechanism of action of ultrasonic cleaning machines mainly has the following aspects:
超聲波清洗機方式超過一般以的常規清洗方法，特別是工件的表面比較復雜，象一些表面凹凸不平，有盲孔的機械零部件，一些特別小而對清潔度有較高要求的產品如：鐘表和精密機械的零件、電子元器件、電路板組件等，使用超聲波清洗都能達到很理想的效果。
A strong shock wave is generated when the cavitation bubble is broken, and a part of the dirt layer is peeled off, dispersed, emulsified, and peeled off under the action of the shock wave. Because of the bubbles generated by the cavitation phenomenon, the gap between the dirt layer formed by the impact and the surface layer and the gap penetrates, because the small bubble and the sound pressure expand and contract simultaneously, the shrinkage, the physical force like peeling repeatedly acts on the dirt layer, the dirt The layers are peeled off and the bubbles continue to penetrate inward until the dirt layer is completely stripped.
超聲波清洗機的作用機理主要有以下幾個方面：
This is the secondary effect of cavitation. The impact of ultrasonic vibration of cleaning fluid on dirt in ultrasonic cleaning. Ultrasonic accelerated chemical cleaning agent dissolves the dirt, combines chemical and physical forces, and超聲波清洗機 accelerates the cleaning process.
